Phones answered 24/7New London, Connecticut
Call (833) 490-5225
Urgent? Phones answered 24/7

Flood cleanup after surge and stormwater in New London

Floodwater, silt and the materials it soaked are removed, the structure is cleaned and dried, and what cannot be saved is sorted out.

  • Phones answered 24/7
  • Tidal and nor'easter flooding
  • Pre-war homes and basements
  • Frozen pipes and burst lines

Get a fast quote

Fastest: call (833) 490-5225. Or send this and we call you back.

Flood Cleanup

Flood cleanup: what it covers

Quick answer

Flood cleanup removes floodwater and the silt it leaves, strips out materials that cannot be cleaned, then washes and dries what remains. New London Water Damage Restoration answers calls for New London around the clock and dispatches a crew as fast as one is available. Floodwater is treated as contaminated, so the work differs from a clean leak.

Flood cleanup illustration for New London, CT, with the New London water tower in the background

Floodwater is not the same thing as a leak. A burst pipe releases water that began clean, while water that comes in from a street, a river, a harbor or a storm drain carries soil, debris and whatever it passed on the way. When it leaves, it leaves a film of silt on every surface and a damp that has soaked into anything porous. Flood cleanup is the work of dealing with that residue as well as the water itself, and it is slower and more thorough than a standard drying job.

New London sits on the Thames River estuary, and water reaches it from several directions. Surge from storms pushes up the river and over low ground. Heavy rain overloads the storm drains. A high tide can hold the outfalls shut so that stormwater has nowhere to go. In the older downtown, where the ground is low and the buildings are old, any of these can put water into a ground floor or a basement without a river ever overtopping its banks in the way people usually picture a flood.

The first hours matter, but safety comes before speed. Phones are answered 24/7 and a crew is dispatched as fast as one is available, and the first visit is mostly about assessing what the water carried in, whether the power and gas are safe, and what can be saved. Only after that does the cleanup proper begin.

Service area
New London & New London County
Availability
Phones answered 24/7, emergencies first
Warning signs

Signs you need flood cleanup

Floodwater can hide open drains, debris and electrical hazards, so do not wade through it and do not let children or pets play in it. Do not touch wet electrical equipment, and do not turn the power back on until it has been checked. Do not mix cleaning products, since some combinations release harmful fumes in a closed basement. Wear boots and gloves if you must enter the area, and keep floodwater off your skin and away from food areas. Anything soaked by floodwater should be left in place and photographed until the technician has assessed it.

  • A line of silt or a tide mark on walls, furniture or basement foundation after the water has dropped
  • A layer of mud or fine grit on floors that returns when you sweep it away
  • Carpet, padding or upholstered furniture that was submerged and stays wet
  • Drywall that wicks water well above the visible waterline
  • Doors and cabinets that swell and stop closing properly
  • A strong earthy or sewage-like smell that lingers after the water has gone
  • Appliances, a furnace or a water heater that sat in water and may now be unsafe
  • Wet insulation inside walls, which can hold water long after the surface looks dry
Job stories

Typical jobs for flood cleanup

Typical job
Illustration: Typical: tide and rain backing water into a low ground floor

Typical: tide and rain backing water into a low ground floor

What homeowners notice
After heavy rain on a high tide, water has come up through a floor drain and spread over the ground floor of an older building, carrying silt along the baseboards.
What we do
The technician confirms the power to the area is off, pumps the standing water, removes the saturated pad and the lowest strip of wall board, and treats everything the water touched as contaminated. Air movers and dehumidifiers run until the readings reach target.
What to expect
The owner receives photos, readings and a list of what was removed, and repairs are quoted separately once the structure reads dry.

one extraction visit, then drying visits typical visit

Options

Types and options for flood cleanup

Storm surge and tide water

Salt-bearing surge from the estuary comes in with tide and wind behind it. It leaves silt and debris, and affects the lowest floor first. In New London, surge is the storm risk with the longest history, and the cleanup has to account for water that was moving as well as high.

Stormwater that overwhelms the drains

When heavy rain fills the storm drains faster than they can empty, water rises at low points and backs up through pipes. This is the pattern the city's own drainage study described for Bank Street. The water can be contaminated if the drains also carry sewage, and that changes how it is handled.

River overflow

Rivers in the region have overtopped their banks during major rain and snowmelt events, and the Thames basin has a long record of them. Overflow tends to bring more silt and debris than a drain backup and may leave a basement full for days. The cleanup includes a longer period of pumping and drying.

Frozen ground and snowmelt water

When ground is frozen or snow melts quickly, water cannot soak into the soil and runs toward foundations instead. It seeps through walls and floor joints rather than rising from a drain. The damage is usually concentrated at the lowest level and along one or two walls, and the source must be addressed to stop it returning.

One call and it gets handled.

A crew is dispatched as fast as one is available, and you approve the estimate before any work starts.

Why is floodwater treated differently from a pipe leak?

Floodwater carries soil, debris and contamination from outside the house, while a pipe leak begins with clean water. Porous materials that floodwater soaks are generally removed rather than dried, because the contamination remains in them.

A water supply line is connected to a clean source. Floodwater has crossed streets, yards and sometimes drains before it reaches a house, and it leaves silt and residue wherever it stood. The sort of material it touches determines what happens next, so a technician sorts the building into what can be washed and what has to go.

That sorting decision is why flood cleanup looks more destructive than other water work. Carpet, padding and low drywall are common casualties, and so is soft insulation. Removal is not a sign that the crew is overdoing it. It is what the contamination calls for, and the Connecticut Department of Public Health publishes guidance for flooded homes that follows the same logic.

What should I do before the crew arrives?

Stay out of the water, stay away from electrical equipment that may be wet, and photograph the damage before anything is moved. Shut off the power at the panel only if you can reach it without standing in water.

Take photographs and short videos of the water line, the damaged items and the rooms affected. Those pictures are the strongest record you will have for an insurer, and they cannot be taken after the cleanup. Write down the time the water arrived and when it started to fall.

Do not run fans or a vacuum from circuits that were underwater, and do not try to start a flooded furnace or water heater. If you have to leave the building, take medications, identification and insurance papers. Everything else can wait for the technician to assess.

Will insurance cover flood damage?

Homeowners and renters policies generally cover some storm damage but generally exclude flood, so a flood loss may go to a separate flood policy with its own insurer. Your policy decides, and the Connecticut Insurance Department can explain how.

The Connecticut Insurance Department publishes a fact sheet on storm water coverage and flood insurance, and its consumer alerts on flood damage lay out the general pattern. Check which policy applies before assuming either way, because the cause of the water and the type of policy decide how the loss is treated.

To see whether a specific property lies in a mapped flood zone, the federal FEMA Flood Map Service Center is the place to look. This page cannot state a zone for any address. Keep a record of every conversation with the insurer, and if the crew finds hidden damage that the adjuster missed, contact the insurer so the difference can be resolved.

What moves the price of a flood cleanup?

The size of the loss, the category of the water, how easy it is to reach the wet areas, whether mold is present, how long drying runs and how much of the contents are affected. The price is confirmed on site before work starts.

Floodwater is generally treated as contaminated, which adds removal and cleaning work that a clean-water leak does not need. A large area with deep silt takes more labor than a damp room, and a finished basement full of belongings takes more than an empty one.

Access, drying time and mold all add or subtract from the job, and none of them can be known before someone looks. So no figure is printed here. The technician assesses the loss, explains what is involved and agrees the price with you before work starts, with changes discussed as they come up.

Is a flooded house safe to live in afterwards?

Not until the water is out, the electrics and fuel appliances are checked and the contaminated materials are removed. Whether you stay depends on the extent of the damage and on the advice of the crew and of your local officials.

A house can look usable days after a flood and still hold wet insulation, silt in the floor cavities and appliances that were underwater. These problems tend to show up later as smells, mold or an equipment failure. The crew's job includes pointing them out so you can decide with the full picture.

Some flooded homes contain materials that need special handling. If the materials may contain asbestos, the Connecticut Department of Public Health says the work needs an asbestos consultant licensed by that department. Ask the crew before anyone breaks into walls or ceilings in an older house.

Our process

How our flood cleanup visit works

  1. Check that the building is safe to enter

    Before anything else, the technician checks the electrical panel, gas appliances and the structure itself. Water that reached outlets or the panel is a hazard, and a floor that was underwater can be slippery or weakened. Protective gear is worn because floodwater is treated as contaminated from the start.

  2. Remove the water and the silt

    Pumps clear deep water, then extraction and shoveling deal with silt and mud, which do not drain away on their own. Silt left in place keeps a surface damp and carries contamination into the materials beneath it. Doing this step early makes every later step easier to carry out and easier to measure.

  3. Sort what can be saved from what cannot

    Porous materials that were soaked by floodwater, such as carpet, padding, soft insulation and low sections of drywall, are usually removed rather than cleaned, because the contamination stays in them. Hard surfaces, framing and masonry can usually be cleaned. Photographs are taken before disposal so the record exists for your insurer.

  4. Clean and disinfect the surfaces that remain

    Remaining surfaces are washed to remove silt and residue, then treated with an appropriate cleaning agent. The technician decides how far to go based on how the water got in and how long it stayed. Washing comes before drying, because drying a dirty surface simply bakes the contamination in.

  5. Dry the structure and take readings

    Air movers and dehumidifiers dry the framing, subfloor and any remaining wall materials, and moisture readings show when each area is finished. Because floodwater often leaves a building wet for days, the structure is checked for mold risk before it is closed up. The technician explains what the readings show before wrapping up.

New London County

Why flood cleanup is different in Connecticut

New London's flood history is mostly a story of the sea and the river. The 1938 hurricane drove surge up the Thames, and a local television news account puts the surge height at New London at 10.6 feet above mean lower low water. Hurricane Carol in 1954 followed, with a storm tide at New London of 9.6 feet by the same account. Those are the benchmarks people in the region still use when they talk about flooding.

Today the pattern is different. Bank Street and South Water Street sit low, about 4 feet above mean sea level, behind a hurricane barrier, flood control conduits and a pumping station built by the Army Corps of Engineers. The city's utilities director said in a December 2025 regional newspaper report that flooding there has been greatly reduced, but still happens when a high moon tide meets heavy rain. A regional report on a nor'easter also described flooding on Broad Street and Pequot Avenue.

Looking ahead, UConn CIRCA's work for New London estimates that about 68 buildings along the Thames River could be vulnerable to flooding by 2050, against 12 under current 100-year projections. That does not predict any one flood. It does explain why surge and tide are part of planning here, and why a household in a low street benefits from knowing what a flood loss involves before one arrives.

Related

Storm surge damage

Surge water is pumped out, silt and debris are cleared, and the structure is cleaned and dried to readings.

Basement flooding

Water is pumped from the basement, the source is identified, and the floor, walls and framing are cleaned and dried.

Sewage backup cleanup

Contaminated water is removed, materials that cannot be cleaned are taken out, and surfaces are cleaned, sanitized and dried.

Water extraction and drying

Standing water is pumped and extracted first, then wet materials are dried to moisture readings before anything is closed up.

Guides

Read before you book

FAQ

Flood cleanup FAQs

How soon should flood cleanup start?

As soon as the area is safe to enter. Floodwater keeps soaking into porous materials and leaves silt that gets harder to remove as it dries. Phones are answered 24/7 and a crew is dispatched as fast as one is available, though no arrival time can be promised, and the technician will advise you on what to do while you wait.

Can any of my belongings be saved?

Often, if they are hard, non-porous and can be washed, such as glass, metal and sealed wood. Soft items soaked by floodwater, including mattresses and upholstered furniture, are usually discarded. Photograph everything before it goes. Papers and keepsakes are worth asking the technician about, since some specialised drying can help.

Why does the crew throw out so much?

Because contaminated water stays in porous material after the water has gone, and drying does not remove it. Carpet, padding and low drywall are the usual items. The crew decides based on what the water was and how long it stood, and photographs the items first so your insurer can see what was affected.

Do I need a flood policy for my house?

That is a question for your insurer and for the federal FEMA Flood Map Service Center, which shows mapped flood zones. Homeowners and renters policies generally exclude flood, which is why a separate policy exists. The Connecticut Insurance Department can explain the general pattern and take complaints.

Will mold grow after a flood?

It can, when materials stay wet. Thorough cleaning and drying lower the chance, but they cannot promise that none will form. The Connecticut Department of Public Health publishes mold guidance for contractors, and the mold remediation page explains what the work involves if growth is found after the water is gone.

How do I check that a contractor is registered?

Residential home improvement work requires a Home Improvement Contractor registration with the Connecticut Department of Consumer Protection. The department's license lookup lets you check a registration. Ask for the paperwork before work starts, and confirm that plumbing or electrical work will be done by someone with the separate state occupational licence those trades need.

Is my furnace or water heater safe after a flood?

Treat any appliance that was in floodwater as unsafe until it has been checked. Controls and wiring can fail after being submerged even if the unit seems to run. Gas and electrical appliances should be inspected by a qualified trade person before they are used again, and the technician can tell you which ones were reached.

WhatsApp