Phones answered 24/7New London, Connecticut
Call (833) 490-5225
Urgent? Phones answered 24/7

Water extraction and structural drying in New London

Standing water is pumped and extracted first, then wet materials are dried to moisture readings before anything is closed up.

  • Phones answered 24/7
  • Tidal and nor'easter flooding
  • Pre-war homes and basements
  • Frozen pipes and burst lines

Get a fast quote

Fastest: call (833) 490-5225. Or send this and we call you back.

Extraction and Drying

Water extraction and drying: what it covers

Quick answer

Extraction removes standing and absorbed water with pumps and vacuums, and drying pulls the moisture left in floors, walls and framing out into the air. New London Water Damage Restoration answers calls for New London around the clock and dispatches a crew as fast as one is available. The work ends when moisture readings, not appearances, say the structure is dry.

Water extraction and drying illustration for New London, CT

Water in a house does two kinds of damage, and they run on different clocks. The first is the water you can see: a puddle on a kitchen floor, an inch standing in a basement, a soaked rug. The second is the water you cannot see, which has already moved into the bottom of the drywall, the subfloor, the sill and the cavity behind the baseboard. Extraction deals with the first kind. Drying deals with the second, and it is the second that decides whether a house is sound a month later.

New London is an old city, and that shapes the work. Roughly half of the city's homes date from before 1940, according to census-based summaries of American Community Survey data. Older houses tend to have plaster over lath, solid wood subfloors, balloon-framed walls with open runs from basement to attic, and layers of flooring added over the decades. Each of those holds water differently, and a technician reads them differently than a newer house with sheet drywall over a slab.

The service starts with a phone call that is answered at any hour, because a burst line or a backed-up drain does not wait for morning. A crew is dispatched as fast as one is available, and the first job on arrival is to find where the water came from and make sure it has stopped. From there the work moves through extraction, a moisture survey, controlled drying and a final set of readings.

Service area
New London & New London County
Availability
Phones answered 24/7, emergencies first
Warning signs

Signs you need water extraction and drying

Do not step into standing water if any outlet, cord, appliance or the electrical panel might be in it, and do not turn the power back on to see whether things work. Do not use a household vacuum on water, which is an electrical hazard as well as a poor tool for the job. Water that may have come from a sewer, a flood or a drain should be treated as contaminated and kept off skin and out of food areas until a technician has assessed it. Opening walls and ceilings in an older house can also disturb materials that call for special handling, so leave demolition to the crew.

  • Standing water or a sheen of moisture on a hard floor that does not dry on its own
  • Carpet or underlay that squelches underfoot or feels cold and heavy
  • Baseboards that lift away from the wall or paint that bubbles just above the floor
  • Drywall or plaster that feels soft, cool or slightly swollen near the bottom edge
  • Wood floors that cup at the edges or crown in the middle after a leak
  • A musty smell that returns in a room you have already mopped and aired out
  • Condensation on windows in a room that was recently wet, even with the heat running
  • A water stain that spreads slowly on a ceiling or wall long after the source was shut off
Options

Types and options for water extraction and drying

Clean water from a supply line or appliance

A failed supply line, a leaking tank or an overflowing fixture releases water that began clean. Materials such as flooring and drywall can often be dried in place if the work starts promptly. The main task is to chase the water into the wall and subfloor, since it travels further than the stain suggests.

Rain and tide water in a basement

Water that enters a basement from the ground, a window well or a drain brings silt and is not treated as clean. Near the Thames River and the downtown waterfront, tide and stormwater can arrive together. Anything porous it touched is assessed carefully, and hard surfaces are cleaned as well as dried.

Water inside an older plaster wall

Plaster and lath dries slowly and can hide moisture behind a surface that looks intact. Balloon framing in older New London homes lets water travel inside a wall to a floor above or below the leak. Small inspection openings and careful readings are usually needed before the wall is called dry.

Water under flooring

Water trapped beneath hardwood, laminate or tile does not evaporate quickly because the surface above it holds it in. Specialised drying mats and sometimes the removal of a few boards let air reach the subfloor. Whether flooring can be saved depends on the material and on how long it stayed wet.

One call and it gets handled.

A crew is dispatched as fast as one is available, and you approve the estimate before any work starts.

How long does drying actually take?

There is no fixed number of days. Drying runs until the readings in the structure match dry reference material, and that depends on what got wet, how much, and how well air can reach it. A technician explains the plan on site.

A thin film of water on a sealed floor can be dry in a short time, while a saturated wall cavity or a thick subfloor can take much longer. Hardwood, plaster, insulation and masonry each release moisture at their own pace, and the humidity in the house affects all of them. Promising a duration before the materials have been measured would be guessing.

What stays the same is the method. Equipment runs continuously, the technician returns to take readings, and the setup is changed as the wet zones shrink. If a reading refuses to fall, that is information: it usually means water is trapped somewhere that has not been opened, and the search moves there.

Why does extraction come before drying?

Pulling liquid water out mechanically is far faster than evaporating it. Drying equipment is built to remove moisture held in materials and air, and it works best once the bulk of the water is already gone.

Fans and dehumidifiers would take a very long time to evaporate an inch of standing water, and in that time the water keeps soaking upward into walls and downward into subfloors. Extraction reduces the load so the drying phase has less to do and the materials spend less time wet.

Carpet and padding are a good example. A wet vacuum can lift a large share of the water from the carpet fibers in minutes, which changes the picture for the padding below. Without that step, the pad acts as a sponge that keeps the subfloor wet for days.

Can wet drywall and plaster be saved?

Often, when the water was clean and drying begins quickly. Drywall that has swollen, crumbled or been soaked by contaminated water is usually removed. Plaster is more forgiving but dries slowly, and a technician decides from readings.

The question is partly about the material and partly about the water. Clean water that wet the lower edge of a wall can often be dried in place if air is moved behind it. Water that carried silt, sewage or floodwater is a different matter, because the contamination stays in porous material after the water is gone.

Where a section has to come out, taking it out also opens the cavity so the framing and insulation behind it can dry. Cutting a wall back a short distance above the visible line is common, because the wet edge inside the wall is usually higher than the one you can see.

What moves the price of an extraction and drying job?

The size of the loss, the category of the water, access to the wet areas, the presence of mold, how long drying runs and how many contents are affected. The price is confirmed on site before work starts.

A small room that was caught early is a different job from a basement that stood in water overnight. The category of water matters because contaminated water brings more removal and cleaning. Access matters because a wet area behind a fixed cabinet, under a tub or in a tight crawl space takes more labor to reach than an open floor.

Drying time drives the equipment, and mold or heavily affected contents add their own steps. For those reasons no honest figure can be printed here. The technician looks at the loss, explains what the job involves and gives the price before any work starts, so you can decide with the facts in front of you.

Will my insurance cover the work?

It depends on the policy and on the source of the water. Homeowners and renters policies generally cover some sudden water losses and generally exclude flood, so a flood loss may go to a separate flood policy. Read your own policy and ask your insurer.

The Connecticut Insurance Department explains the general pattern: storm damage from wind and fire is typically covered, and flood is typically excluded, which is why some households hold a separate flood policy with its own insurer. Which category your loss falls into is a question for your policy and your insurer, not for the crew.

Keep a written record of every conversation with the insurer, and photograph the damage before anything is moved. If the crew finds hidden damage that an adjuster missed, contact the insurer to resolve the difference. The Connecticut Insurance Department's Consumer Affairs Division handles complaints, and the Connecticut Department of Consumer Protection can confirm a contractor's home improvement registration.

Our process

How our water extraction and drying visit works

  1. Stop the source and make the area safe

    Water that is still arriving makes every later step pointless, so the technician confirms the source is shut off or contained first. They also check for electrical hazards where water has reached outlets, cords or appliances. If the power needs to be shut off at the panel, they will tell you which circuits to leave alone.

  2. Extract the standing and absorbed water

    Submersible pumps move deep water out of a basement or crawl space, and wet vacuums and extraction wands lift the rest from hard floors and carpet. Removing liquid water mechanically is far faster than evaporating it, so this step is done thoroughly before any drying equipment is set up.

  3. Survey where the moisture went

    A moisture meter and a thermal imaging camera show where water has moved beyond the visible wet area. The technician reads the bottom of walls, the subfloor and the framing, and marks the wet zones. This map is the baseline that every later reading is compared against.

  4. Set up controlled drying

    Air movers push dry air across wet surfaces, and dehumidifiers pull the moisture out of the room so it cannot settle somewhere else. Wet padding, saturated insulation or drywall that will not recover may be removed so the framing behind it can dry. The equipment is placed to suit the room, not set in a standard pattern.

  5. Monitor and confirm dry

    The technician returns to take readings, adjust the equipment and move air to the slowest areas. Drying is finished when the readings in the structure match those of dry reference material, and only then is the equipment removed. A room that feels dry to the hand can still read wet inside a wall.

New London County

Why water extraction and drying is different in Connecticut

The low ground near the Thames River estuary is where water and drying meet in New London. Bank Street and South Water Street sit about 4 feet above mean sea level behind a hurricane barrier, flood control conduits and a pumping station built by the Army Corps of Engineers, according to a 2015 city-commissioned drainage study. That protection has reduced flooding, but the city's utilities director said in a December 2025 regional newspaper report that Bank Street still floods when a high moon tide meets heavy rain.

The cause is stormwater overload: when the tide is high, water backs up through the pipes instead of draining out. For a building on a low street, that means water can arrive from below as well as from above, and a basement or ground floor can be wet without a roof leak or a failed pipe anywhere in the house. In these cases the technician looks for the water path first and the drying plan second.

Housing age is the other local factor. With about half of the city's homes dating from before 1940, many New London houses have original framing, plaster walls and floors that have been covered and recovered. Drying those assemblies takes patience and careful readings, and the technician will often check two or three spots in one wall before declaring it dry. The age of the house is part of the job, not an obstacle to it.

Related

Flood cleanup

Floodwater, silt and the materials it soaked are removed, the structure is cleaned and dried, and what cannot be saved is sorted out.

Basement flooding

Water is pumped from the basement, the source is identified, and the floor, walls and framing are cleaned and dried.

Dehumidification and air drying

After water is removed, the building still holds moisture. Air movers and dehumidifiers dry it, and readings show when the structure is back to normal.

Mold remediation

Mold follows water that was not dried. Remediation removes the growth, fixes the moisture and follows state guidance.

Guides

Read before you book

What moves a water damage restoration quote in New London

A New London quote follows the size of the loss, the category of the water, how hard the affected rooms are to reach, whether mold has started, how many days of drying the materials need and how much of your contents must be moved.

FAQ

Water extraction and drying FAQs

How quickly should water extraction start?

As soon as the source is stopped and the area is safe to enter. Water keeps moving into porous materials for as long as it is present, so the sooner it is removed, the less of the structure has to be dried or replaced. Phones are answered 24/7 and a crew is dispatched as fast as one is available, but no arrival time can be promised.

Do I need to move furniture before the crew arrives?

Lift what you can safely and easily, such as small items, rugs and anything on the floor that is not yet wet. Leave heavy furniture alone and avoid straining yourself. Wooden legs sitting in water stain flooring, so a small piece of foil or plastic under each leg is a simple step. The crew will move the rest as part of the job.

Why do I need equipment running for days?

Because the water inside a wall, a subfloor or a framing member only leaves as vapor, and that takes time and moving, dry air. Equipment that is switched off early can leave moisture in the structure, where it may feed mold or swell materials later. Readings, not the clock, decide when the machines go.

Is the noise and heat from drying equipment normal?

Yes. Air movers and dehumidifiers are loud, and dehumidifiers put out warm, dry air, so the room can feel warmer than usual. That is part of how the moisture is removed. The technician sets up the equipment to suit the layout and can explain what each piece is doing and which doors to keep closed.

Can I stay in the house while it dries?

Often, yes, if the affected area can be separated from the rest and the water was clean. If the water was contaminated, if the power has to be off, or if large areas are open, staying may be a poor choice. The technician will advise after seeing the loss, and your own comfort and safety count in that decision.

Who checks that a contractor is registered in Connecticut?

Residential home improvement work requires a Home Improvement Contractor registration with the Connecticut Department of Consumer Protection, and the status can be checked using the department's license lookup. Plumbing and electrical work call for separate state occupational licences. Ask whoever does the work for their paperwork before they start.

Does drying stop mold from forming?

Prompt, thorough drying removes the moisture that mold needs, so it lowers the chance of growth, but it cannot promise that none will appear. If a material stayed wet for a long time before the work began, the technician checks for growth as well. The mold remediation page explains what happens if it is found.

WhatsApp